Frame
Tractor - Channeled and fully welded 1.5 x 1.5 x 0.187 in. wall tubing with a ground clearance of 4.0 in., strategically located, continuous force counterweight springs
Caster forks - 0.50 in. thick rear
Tractor - Channeled and fully welded 1.5 x 1.5 x 0.187 in. wall tubing with a ground clearance of 4.0 in., strategically located, continuous force counterweight springs
Caster forks - 0.50 in. thick rear
Seat
Commercial grade high back contoured foam padded with hinged mounting
Commercial grade high back contoured foam padded with hinged mounting
Rollover Protection (ROPS)
Optional 2-post foldable ROPS with seat belt and latch
Optional 2-post foldable ROPS with seat belt and latch
Safety Features
Safety package - Operator Presence Controls (OPC) and drive system interlock
Safety package - Operator Presence Controls (OPC) and drive system interlock
Drive Type
Drive description - New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors
Drive description - New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors
Number of Speeds
Infinitely variable speed selection
Infinitely variable speed selection
Travel Speed Forward
0 - 7.0 mph (11.3 kmph)
0 - 7.0 mph (11.3 kmph)
Travel Speed Reverse
0 - 4.5 mph (7.2 kmph)
0 - 4.5 mph (7.2 kmph)
Drive Tires
18 x 10.5-10 Multi-Trac® C/S
Drive wheel release - Allows movement without engine running
18 x 10.5-10 Multi-Trac® C/S
Drive wheel release - Allows movement without engine running
Steering Tires
Caster tires - 8 x 3.0-4 semi-pneumatic
Caster tires - 8 x 3.0-4 semi-pneumatic
Parking Brake
Wet disc, internal in wheel motor
Wet disc, internal in wheel motor
Engine Make
Kohler
Kohler
Engine Model
CH740, Command™ series
CH740, Command™ series
Horsepower
25 hp @ 3,600 rpm engine speed
25 hp @ 3,600 rpm engine speed
Displacement
725 cc
725 cc
Air Cleaner
Air filter - Heavy-duty canister air filtration
Air filter - Heavy-duty canister air filtration
Fuel Type
Gas carbureted
Gas carbureted
Fuel Capacity
7.5 gal. (28.4 l), pivoting tank for easier engine service
7.5 gal. (28.4 l), pivoting tank for easier engine service
Length
91.8 in. (233.2 cm)
91.8 in. (233.2 cm)
Width
43.2 in. (109.7 cm)
43.2 in. (109.7 cm)
Height
51.2 in. (130 cm)
51.2 in. (130 cm)
Weight
Curb - 1,173 lb.
Curb - 1,173 lb.
Mowing Width
42 in.
42 in.
Mowing Height Range
1.0 - 4.0 in. (2.54 - 10.2 cm)
1.0 - 4.0 in. (2.54 - 10.2 cm)
Mowing Height Adjustments
0.25 in. (0.64 cm) increments
0.25 in. (0.64 cm) increments
Steering
Control - FeatherTouch hand-control drive levers, low-force constant speed lever
Control - FeatherTouch hand-control drive levers, low-force constant speed lever
Deck Construction
7 ga. sides joined by a continuous bead weld to a 10 ga. top, 3/16 in. wear guard is welded to the entire base of the deck, 7 ga. deck spindle supports, 0.25 in. thick strap steel deck supports
Deck style - Floating deck
Deck style description - Full floating center discharge cutting deck for dedicated bagging with patented fill reduction baffles and heavy duty gear driven spindle assembly
7 ga. sides joined by a continuous bead weld to a 10 ga. top, 3/16 in. wear guard is welded to the entire base of the deck, 7 ga. deck spindle supports, 0.25 in. thick strap steel deck supports
Deck style - Floating deck
Deck style description - Full floating center discharge cutting deck for dedicated bagging with patented fill reduction baffles and heavy duty gear driven spindle assembly
Deck Lift
Deck latch for easier height of cut adjustment
Deck latch for easier height of cut adjustment
Spindles
Blade - Heavy duty cast iron right-angle gearboxes
Blade - Heavy duty cast iron right-angle gearboxes
Blades
2 at 22 in. length
2 at 22 in. length
Blade Tip Speed
Approximately 18,500 fpm
Approximately 18,500 fpm
Bagger
Capacity - 9.5 bu. (76 gal.)
Capacity - 9.5 bu. (76 gal.)
Power Take-Off (PTO)
Engagement - Lever-actuated clutching belt with 6 in. brake band
Engagement - Lever-actuated clutching belt with 6 in. brake band